Servicing All of Texas including Austin, Georgetown, Round Rock, Cedar Creek, San Marcos, Cedar Park, Pflugerville and Temple, TX

Serco Versadock Dock Leveler

With the popularity of air-ride suspensions, high-capacity “low boy” trailers and the increasing use of low-profile tires, truck bed heights can be extended beyond the 12″ reach of most conventional levelers, making service of these trailers difficult or impossible. And with trailer widths averaging up to 8′ 6″, conventional 7′ 0″ wide levelers leave little or no room for forklift maneuvering. When freight handlers attempt to “cube out” the trailer, loads are often impossible to end-load without the use of dedicated docks or expensive truck-leveling devices.

Design Highlights
  • Full 9′ Wide Below-dock Access
  • Patented HYDRA MAX® Powered-in/Powered-out Lip Extension
  • Regenerative Hydraulics
  • Yieldable Hydraulic Lip
  • Auto Return-to-Dock
  • Push-button Quick Cycle Lip Extension
  • Steel NEMA 12 Push-button Control Panel (Non-Interlock Capable)
  • Hydraulic Velocity Fuse Safety Stop
  • CLEAN FRAME® Design
  • Full Operating Range Toe Guards
  • Below-dock Endloading Capability
  • Grease Fittings
  • Integral Maintenance Strut & Lip Support Latch (Dual Struts on 80K Capacity Only)
  • Weatherseal
  • Full Pit Steel Kit Including Pit Floor Embeds
  • Heavy-duty B410-14F Dock Bumpers

Serco Power-Assisted Dock Leveler Model PAL

The PAL combines two proven technologies, the durability of a mechanical leveler and Serco’s proven, high-performance, hydraulic operation. Unlike mechanicals, which have a strong upward bias, the PAL utilizes a hydraulic power-pack assembly and counterbalance assist to produce a slight downward bias. The PAL’s unique hybrid design eliminates complex hold-down systems required by mechanicals to keep them stored. Also gone are the costs and downtime associated with frequent adjustments and hold-down replacement.

Serco’s Power-Assisted Leveler is designed to maintain an efficient operation 24-7. In the event of a power failure during loading/unloading, the PAL can be restored, and the building secured, with an easy-to-use manual override device. If busy schedules demand that operations continue, the tool can be used to position the leveler manually.

The PAL also incorporates Serco’s exclusive Reflex™ anti Stump-out system provides fluid free-float motion while also providing a measure of free-fall protection in the event of premature trailer separation.

Design Highlights
  • New! Exclusive SafeTFrame® Design
  • Manual Override/Power Outage Capability (Activation Tool Included)
  • Structural Steel Safety Legs with Reflex™ Anti-Stump-out System
  • Exclusive HYDRA CAM™ Plus Automatic Lip Extension
  • High Tensile Steel Lip, Deck & Beams
  • Non-Metallic Push-button Control Panel (Non-Interlock Capable)
  • 120V Single Phase Operation
  • CLEAN FRAME® Design
  • Full Operating Range Toe Guards
  • Below-dock Endloading Capability
  • 16″ Lip Standard
  • Grease Fittings
  • Integral Maintenance Strut & Lip Support Latch
  • Heavy-duty B410-14F Dock Bumpers

Serco Vertical Dock Leveler

Design Highlights
  • Leveler Powered Down to Working Range via Constant Pressure – Push-button
  • Dual Acting Lip Powered Both Directions
  • Steel NEMA 12 Control Panel (Interlock Capable) with Raise, Lower, Lip In, Lip Out, Mushroom-style Stop, Amber & Green Illuminated Operation
  • Indicator Lights
  • PLC Programmable Controller
  • Remote-mounted Power Unit, Valves & Solenoids with Mounting Bracket & 20″ Hydraulic Hose
  • Patented Hinged Bottom Draft Pad
  • Terminals for Interlocking Door or Restraint
  • Rear Embed Mounting Channel with 5 Factory-Welded Hinges
  • 4″ High Runoff Guards
  • Structural Channel Beam Deck
  • Integral Maintenance Locking Bar with Lock-out/Tag-out Capability
  • Two VB420-11FF Bumpers with Riser Brackets

Serco Vertical Hydraulic Rail Leveler

The Hydraulic Rail Leveler is designed specifically for rail car operations. With the same vertical storing and safety features as its dock leveler counterpart, the Rail Leveler is an ideal solution to increase efficiency during rail car loading operations.

Design Highlights
  • Leveler Powered Down to Working Range via Constant Pressure Push-button
  • Steel NEMA 12 Control Panel (Interlock Capable) with Raise, Lower, Lip In, Lip Out, Mushroom-style Stop, Amber & Green Illuminated Operation
  • Indicator Lights
  • PLC Programmable Controller
  • “Quick-Cycle” Powered-In/Powered-Out Hydraulic Lip Activation
  • 20″ Lip Standard
  • Includes End Loading Capability
  • On Manual Side Shift Units, Lateral Rail Brake Prevents Side Shifting When Leveler Is Lowered
  • 6″ High Runoff Guards