Servicing All of Texas including Austin, Georgetown, Round Rock, Cedar Creek, San Marcos, Cedar Park, Pflugerville and Temple, TX

Serco SLP3000 Recessed Vehicle Restraint

The SLP is installed in a pit under the leveler and, when retracted, offers a clean dock face, allowing unobstructed access to smaller delivery vehicles, trailers with hydraulic lift gates and an open drive for unimpeded snow plowing or drive cleanup.

The hydraulically activated SLP effectively controls vehicle movement by grabbing and holding the rear impact guard throughout the loading/unloading process.

Design Highlights

  • Recessed, Pit Mounted Design
  • Non-Impact, Hydraulic Activation
  • Power to Match Dock Leveler
  • Auto Restore (if no Rear Impact Guard)
  • Sign Package
  • LED Interior & Exterior Communication Lights
  • Horizontal Hooking Range 4 – 14″ From Dock Face
  • 9 – 28″ Vertical Hooking Range
  • Programmable Controller

Serco Pit-Bull Truck Restraint Model Sl90

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL40

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power – PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical – PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL10

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL20

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL60

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL70

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)

Serco Pit-Bull Truck Restraint Model SL80

PitBull restraints are available in a variety of models to suit virtually any loading dock operation or configuration in the industry.

Power: PitBull Safety-Loc series powered restraints provide automatic push-button activation with advanced electronics and standard LED communication systems for increased dock safety and security. Driveway or wall-mounted units available.

Mechanical: PitBull Safety-Loc series mechanical restraints are manually activated and offer lower day-to-day operating costs, higher up-time performance and operational simplicity. Some units can be combined with a light communication package for clear communication.

Design Highlights

  • Dual Locking Positions at 7″ & 11″ From Face of 4″ Bumper
  • Horizontal Hooking Range 0 – 11” From Face of 4″ Bumper
  • Non-Impact Design & Operation
  • 120V Single Phase (SL60-90 Only)
  • Low-Profile – Stores at 9″ Off Grade
  • Hot Dip Galvanized Finish
  • Optional Driveway Mount Capability
  • Standard Backplate Height 23 1/2″ Wall Mount / 16″ Ground Mount
  • Wedge Anchors for Installation Included (3/4 x 5-1/2)
  • LED Interior & Exterior Communication Lights (Not available on SL10)